- 注册时间
- 2004-12-11
- 最后登录
- 1970-1-1
|
楼主 |
发表于 2008-8-17 10:31:32
|
显示全部楼层
我用的是cf卡,分了两个主分区,一个fat16,一个ext3,按照官方的说明应该没错啊。
==============
Downloading bootloader(cyace or hpcboot), Root File System Image, vmlinux and linux-modules for your model from sourceforge project page.
Repartition your CF card(at least 32M), make a FAT file system(>=16M) in the first partition and a EXT3 file system(>= 16M) in the second partition. They will be /dev/sdX1 and /dev/sdX2 if you use the usb card reader under Linux.
Copy the bootloader and vmlinux to the first partition, untar the root file system image and linux-modules into the second partition.
Plug the CF card into your device, turn on the power, invoke the bootloader under Windows CE (the bootloader is a Windows CE application in fact) to boot the Linux. |
|