[分享]龟兔赛跑的LAVA小演示~

lw8776

以下是引用wanglejia在2006-7-4 15:52:00的发言：[BR]要是加入图片就好了

加入了图片~~不过可能由于偶美工烂~~画的难看的说……
[em04]

星界小记者

好玩！呵呵！

wanglejia

要是加入图片就好了

wanglejia

没关系,用文字代替方框就好了

Isword

呵呵,可以作为FLASH影片来看哦.


[em01][em01][em01]

lw8776

首先说一下下~：这个无聊东东是昨天无聊的时候看到的一个无聊的C的题目~~然后用只剩下记事本的WQX写出LAV的代码（改了一点点原题目~），贴出来给比我还菜的人看看，各位老大哥们就不要抨击偶了……还请各位老大哥们对程序中不规范的地方给说说……（第一次贴源码~~感觉有点怪，还是这么简单+超级无聊的~~~）

说明：下面这段代码模拟了龟兔赛跑爬山的情况,其中有个时钟触发设置每0.1秒执行一次循环,乌龟的规则是:50% 的机会快走(右移三格);20% 的机会下滑(左移六格);30% 的机会慢走(右移一格).

兔子的规则是:20% 的机会睡觉(不移动);20% 的机会大跳(右移九格);10% 的机会大滑(左移十二格);30% 的机会小跳(右移一格);20% 的机会小滑(左移两格).

其中最先走到155 格的胜利

2. //^@^
4. char tu_pic[]={0xF,0x3,0x81,0x9,0x6,0x61,0x5,0x4,0x21,0x4,0x89,0xC1,0x4,0x89,0x1,0x6,0xFA,0x1,0x6,0xFA,
5. 0x1,0x8,0x6,0x1,0xC,0x1,0x81,0x8,0x0,0xC1,0x9,0x8C,0x41,0x19,0x8C,0x41,0x19,0x8C,0x71,0x60,
6. 0x7C,0x31,0x1C,0x8C,0x71,0x1C,0x78,0xC1,0x1C,0x38,0xC1,0xE0,0x0,0xFD,0x80,0x0,0xF,0xE0,0x0,0x7,
7. 0x1C,0x0,0x31,0x4,0x0,0x71,0x64,0x10,0xF,0x7C,0x3C,0x3,0x4,0x47,0xD,0x4,0x41,0xD,0x3,0x80,
8. 0xF1};
10. char gui_pic[]={0x0,0xF,0x83,0x0,0x1C,0x83,0x0,0x38,0xE3,0x0,0x31,0x73,0x0,0x31,0x13,0x0,0x38,0xB,0x0,0x10,
11. 0xB,0x0,0x14,0x5B,0x1F,0x92,0x7B,0x3F,0xF3,0xF3,0x7F,0xFB,0xF3,0x98,0x6C,0x1F,0x80,0x23,0x87,0x80,
12. 0x60,0x77,0xA0,0x20,0x5B,0x80,0xC0,0xE3,0xC8,0x40,0xE3,0xA4,0xE0,0x83,0x43,0xC0,0x83,0x43,0xC0,0x83,
13. 0x33,0x70,0x83,0x3E,0x39,0x83,0x1A,0x1F,0x3,0x3,0x7,0x83,0x3,0x81,0xE3,0x4,0xF0,0x13,0x5,0x8,
14. 0x63,0x19,0x7,0xC3,0x1F,0x7,0x83};
15. int gui_x;
16. int tu_x;
18. void gui(int random)
19. {
20. if(random<=5) gui_x=gui_x+3;
21. if(random==6||random==7) gui_x=gui_x-6;
22. if(random>=8) gui_x++;
23. if(gui_x<1) gui_x=1;
24. WriteBlock(gui_x,5,22,29,1,gui_pic);
25. }
27. void tu(int random)
28. {
29. if(random==3||random==4) tu_x=tu_x+9;
30. if(random>=5&&random<=7) tu_x++;
31. if(random==8||random==9) tu_x=tu_x-2;
32. if(random==10) tu_x=tu_x-12;
33. if(tu_x<1) tu_x=1;
34. WriteBlock(tu_x,45,23,27,1,tu_pic);
35. }
37. void main()
38. {
40. Refresh();
41. for(;;){
42. ClearScreen();
43. gui(1+rand()%10);
44. tu(1+rand()%10);
45. Refresh();
46. Delay(100);
47. if(gui_x>tu_x&&gui_x>150) {TextOut(50,30,"乌龟赢了！",1);Refresh();break;}
48. if(tu_x>gui_x&&tu_x>150) {TextOut(50,30,"兔子赢了！",1);Refresh();break;}
49. }
50. getchar();
51. }

复制代码

[此贴子已经被作者于2006-7-4 17:41:06编辑过]