易码技术论坛

 找回密码
 加入易码
搜索
查看: 878|回复: 2

[讨论]nc3000和tc800的处理器的具体型号~知道的进来说说

[复制链接]
发表于 2008-3-2 16:27:19 | 显示全部楼层 |阅读模式
nc3000和tc800的处理器的具体型号到底是什么?

我感觉应该都是凌阳的,因为早期wqx都用凌阳的芯片!

还有,nc3000中061处理器的存储器有多大?64K?

我们学校的061开发板的存储器是32K的...
发表于 2008-3-3 01:03:59 | 显示全部楼层
TC800是用凌阳的SPMC75

至于是SPMC75F2313A,还是SPMC75F2412A就不清除了.

NC3000的我不知道
发表于 2008-9-7 13:13:23 | 显示全部楼层
GPL161001A,如果我没猜错的话,tc800的cpu就是这个
Built-in 16-bit µ’nSP microprocessor
128K-word mask ROM
8K-word SRAM
CPU clock: max. 51.6096MHz
18 INT sources can be selected as IRQ or FIQ
Three power saving mode:
Standby mode/Halt mode/Wait mode
Max. 2.0µA @ 3.3V in Standby mode
Max. 10µA @ 3.3V in Halt mode
Four chip-selection pins to access external standard memory
NAND flash interface
Asynchronous serial interface (UART)
Supports SPI interface
Three 16-bit timers/counters
Two 10-bit PWM (DAC) audio outputs
Maximum up to 43 general I/Os (bit programmable)
Key wakeup/interrupt function (IOA&OB)
PLL feature for system clock
32768Hz Real Time Clock (RTC)
Low voltage reset and low voltage detection
Watchdog, system bus/address error reset
ICE function for development and down load into flash memory
Software-based audio processing
您需要登录后才可以回帖 登录 | 加入易码

本版积分规则

Archiver|手机版|小黑屋|EMAX Studio

GMT+8, 2024-4-25 22:03 , Processed in 0.009040 second(s), 18 queries .

Powered by Discuz! X3.4

© 2001-2017 Comsenz Inc.

快速回复 返回顶部 返回列表